Product Details

Technical Parameter

1. Test method: a flexible circuit board standard sample, one end is fixed on the tension device at the upper end of the instrument, and the other end is fixed on the rotating fixture at the lower end. The tension device has a adjuster to adjust the adjuster in the test process. Maintain a force of 50g.

2. Control mode: touch screen operation

3. Bending the R angle: 0.1-10mm, you can replace the different molds. Two molds of 0.1mm, 0.38mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 2.0mm, 5mm, 10mm, 12mm; total 18

4. Bending angle: asymmetry angle of 0-180 degrees (can be set)

5. Load: 100, 200, 300, 500 grams each of four, a total of 16

6. Bending speed: 10-200 times can be set

7. Bending count: 0-99999999 times can be set

8. Bending stroke: 20-100mm

9.FPC maximum width: 100 mm (distance before each group)

10. Panasonic servo motor: 4 stations (one motor control 2 stations, each group can be independently controlled)

11. Safety protection device: 1 (the outer window is made of acrylic glass to set the sliding door, and the internal operation can be seen from the outside)

The 12, 1 and 2 stations move together; the 3 and 4 stations move together and are controlled by two sets of Panasonic servo motors.

13. With automatic search for origin function

14. Measureable plate thickness range: 0.05-0.2mm

15. Open circuit automatic stop test function