1. Application:

The computer servo insertion force testing machine is suitable for the insertion force and extraction force test of various connectors, and provides various connector special fixtures and automatic centering devices. This device is easy to operate with Windows windows, and all data can be stored (test conditions, displacement, curves, life curves, inspection reports, etc.), Xiangmin can solve the problem of various connector test fixtures, male and female connections during testing The device can be automatically aligned, and there is no problem of only one side being inserted. With a dynamic impedance test system, the dynamic impedance can be tested while testing the insertion force and the "load stroke-impedance curve" can be drawn. Testable projects/applications:

1.1 Plug and unplug the entire row of connectors

1.2 Connector single-hole plug-in

1.3 Connector plugging life test            

1.4 Connector single PIN and plastic retention test

1.5 Connector Normal Force Test

1.6 Compression test of connector shrapnel

1.7 Connector dynamic impedance test, various pull and pressure tests

1.8 Various pull/pressure tests

2. Technical parameters:

2.1 Specified maximum load: 50, 20, 10, 5Kg (standard 50kg sensor)

2.2 Minimum resolution: 0.01

2.3 Maximum measuring height: 75mm

2.4 Minimum fine-tuning distance: 0.01mm

2.5 Loading accuracy: ±0.2%

2.6 Displacement accuracy: ±0.2%

2.7 Speed accuracy: ±0.1%

2.8 Measuring speed range: 0-300mm/min

2.9 The maximum effective width of the jaw: 40mm

2.10 Effective adjustable stroke of XY micrometer platform: 10mm

2.11 Machine column height: 660mm

2.12 Dimensions between the upper and lower clamps of the host: 100mm

2.13 Machine column spacing: 200mm

2.14 Transmission mechanism: high precision ball screw

2.15 Drive motor: servo motor

2.16 Sensor: Force sensor imported from the United States

2.17 Motor: 220V±10% 0.2KW/0.4KW

3. Equipment features:

3.1 Test condition setting: Check the settings in the computer drop-down menu or directly input data, including: test category, measurement movement direction, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, measurement The total number of times, the pause time each waiting position, the number of times of air pressure, etc. (Test conditions can be stored)

3.2 Can display and print: load-travel curves-load attenuation life curves-inspection reports, etc.

3.3 The load protection function of the load cell can ensure that the load cell will not be damaged.

3.4 Automatic load zero detection, and can set the origin detection load value.

3.5 Load unit display: N, lb, gf, Kgf can be switched freely.

3.6 It can be equipped with several load cells at the same time (2Kgf/5Kgf/20Kgf/50Kgf optional).

3.7 The machine adopts a high-rigid structure design and is equipped with a servo motor to ensure accuracy under long-term use. It is suitable for general tension and compression tests and insertion and extraction force life tests.

3.8 Automatic stop function: During the life test, the machine stops automatically when the test data exceeds the set upper and lower limits.

3.9 Measurement items: maximum load value, peak value, valley value, stroke load value, load or stroke resistance value.

4. Test report output:

4.1 The load-travel curve diagram and test report are all A4 standard paper specifications, and are directly printed by computer printers;

4.2 Plug-in load-travel graph: It can directly display and store the displacement and force value changes of each test; (X-axis represents stroke, Y-axis represents force)

4.3 Each measurement graph can track the trajectory, determine the load and travel value corresponding to each measurement point, the minimum resolution is 0.01mm; the curve is automatically stored by the computer, and can be zoomed in and out at any time, and N curves can be placed arbitrarily on a piece of paper ;Scroll type curve display, you can browse the curve at will; display the load-travel curve and life curve at the same time.

4.4 Test report

4.4.1 The title of the report can be modified at any time;

4.4.2 The report can display the maximum value, minimum value and average value of each curve;

4.4.3 It can be set to display multiple sets of life curves at the same time.

4.4.4 The test report is automatically generated (A4 size), and can be converted and output (Excel) or directly output through the network;

Automatically calculate the maximum value, minimum value, average value, difference, standard deviation, etc.;

5. List of equipment accessories: