Product Details

Scope of Application

This machine is suitable for a variety of connector plug-and-pull test. It adopts embedded microcomputer measurement and control technology, which can display the continuous change value of insertion and extraction force and record the maximum insertion force value, and has the setting of times and adjustable speed stroke. It can display the speed value, and with the automatic centering device, you will get a fully accurate insertion force test.

Product Specification

Test Items

Test hole plug connector; 
Test row of the connector plug;
Life test plug connector;
Single-pin connector and plastic Retention Test;
Connector test ;
Various compression, tensile breaking strength test.

Introduction of insertion force test software

A. This instrument adopts 240*128LED display screen. The screen size is large and the appearance is beautiful. It is equipped with a separate matrix keyboard and 15-digit AD capture card, which makes the input more simple and convenient, and the force value measurement accuracy is high. This watch is easy to install and has simple wiring, which can greatly shorten the production cycle for customers. The insertion force tester only needs to be equipped with this instrument to meet all test requirements.

B, Instrument Function:

1. With automatic overload reset alarm function to maintain the machine.

2. With automatic save function, the maximum test data can be saved up to ten times, and the average value can be obtained, and can be viewed and printed at any time.

3. Use the list mode to display the saved test data.

4. With an administrator password, the user can modify the power-on password to make the machine management more secure.

5. Use the software to calibrate the load value and automatically calibrate the force value.

6. Use the full English prompt to set the internal function, which is easy to operate.

7. The number of times the plug count counts: 0~999999 The target number of times can be set (0-

999999), when the number of measurements is equal to the target number, the machine will automatically stop.

8. Display mode: Large-screen LCD real-time display.

9. Insertion and extraction force range: 0~50kg (other can be customized)

10. Minimum insertion force resolution: 0.01kg

11 Test speed: 3~100 (digital display)

12. Three power unit conversions: N, KGf, LB

13. Screen size: 144*104mm, pixel 240*128. Motherboard size: 110*95mm