Product Details

Product introduction

Sand Dust Resistance Test Chamber has a wide temperature control range;

The inner and outer box materials of the test chamber are made of SUS304 stainless steel plate, and the overall appearance is beautiful and generous;

The machine is equipped with a visible glass door to facilitate observation of the state of the sample being tested in the test chamber; It is controlled by an imported intelligent temperature controller (Moeller), and the temperature is directly digitally displayed.

Main Function

Sand Dust Resistance Test Chamber is a test chamber for simulating the dust test and sand test of the sample in a dusty climatic environment; it is suitable for the simulation test of IPX5 and 6 for electronic and electrical products (shell dust test)

Standards

GB4208-2008、IEC60529-2001 Degrees of protection provided by enclosures (IP Code);

GB/T2423.37-2006、IEC 60068-2-68:1994 Standard Environmental testing - Part 2-68: Tests - Test L: Dust and sand;

GB/T4942.1 Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code) from SAI Global;

GB/T 4942  Protection grade for low voltage device shell;

GB10485 Road vehicles lighting and light-signalling devices - Environmental endurance;

GB2423.37 Sand and Dust Test Method;

GB71001 Degrees of protection provided by enclosures for low-voltage apparatus

Performance Parameters

Main Configuration Instructions

The structure of the body: mainly consists of a studio, a frame, an outer box, a box door, a thermal insulation filling material, a heating system, a control circuit system, a control execution system, an auxiliary structural member, etc. (vacuum pump, etc.);

Studio material: mirror SUS304 stainless steel;

Outer box material: surface atomized SUS304 stainless steel;

Box door: 1000*1000*80mm, tempered glass inlaid in the middle as observation window, size: 500*500mm; the door material is the same as the main body, using SUS304 material, and the polystyrene foam is used in the middle to make it strong and heat-insulated;

Body insulation filling material: polystyrene foam forming;

Control circuit system mainly uses materials: Schneider AC relay, CHNT leakage air switch, Jinlong Yu wire and cable;

Control Execution System: Imported touch programming LCD TEMP880 controller;

Heating system: U-shaped electric heating tube, stainless steel, power: 2KW;

Vacuum pumping of pneumatic components: vacuum pump suction flow: 0~6L/min, 0~2kpa; vacuum gauge, air filter, centrifugal blower, etc.;

Vibrating device: eccentric motor;

Test lead hole: diameter 50mm, add inner and outer sealing cover;

Safety device: leakage and power failure protection, overload fuse protection, fan overheat protection;

Power socket in the studio: 1 dust-proof socket;

Attachment: Introduction of sand dust test chamber controller

1. 5.7-inch true color touch thin screen;

2. Two control methods: setting/program;

3. Sensor type: PT100;

4. Output mode: PID control output / 4-20mA analog output (1-5V) / (0-10V can be arbitrarily selected);

5. Control output signal: a. 8-way switch auxiliary control signal (IS, T, AL control signal); b. Standard 10 switch signal relay output (optional 20 relay output);

6. Temperature measurement range: -90.00℃--200.00℃, (-90.00℃--300.00℃, optional)

Tolerance: ± 0.2 ℃;

7. Special functions: blowing dust, vibration, vacuum;

8. Communication interface (RS232C/RS485, the longest distance of communication is 1.2km [optical fiber can reach 30km];

9. Interface language type: Chinese/English;

10. Program editing: 120 programs can be programmed, each program can be edited with a maximum of 99 segments, for a total of 1200 segments;

11. The product display is clear and intuitive, the programmable control system is flexible and convenient to operate, stable in performance and more efficient in operation;

12. Dimensions: 184 × 144 × 94 (mm) (length × width × height);

13. Mounting hole size: 173 × 133 (mm) (length × width);