1. Application

The testing machine is suitable for all kinds of RUBBER, metal shrapnel, buttons, switches, computer keyboards, mobile phone buttons, etc. to do [load-travel] curve test, and to complete the pressure rebound elasticity test at the same time. This equipment adopts Windows XP window program setting, which is easy to operate and automatically stores data: load-travel curve, life decay curve, test results,Test methods can save calls. This device using high-precision load cell measurement and servo motor drive, it can measure completely accurate [load-travel] test results. It is actually a necessary testing instrument for research and development and quality inspection of various button manufacturers. typical application:
1.1Rubber RUBBER button curve test
1.2Metal shrapnel button curve test
1.3Keyboard mobile phone key curve test
1.4Various switching curve tests
1.5Test interface report style:chart report+data report+Life Curve Report

2.technical parameter
2.1Test load type: 5kgf (standard configuration)

2.2Test accuracy: 0.1gf (2kgf)
2.3Minimum display load: 0.01gf
2.4Maximum test stroke: 100mm
2.5Minimum display stroke: 0.001mm
2.6Test speed range: 0-200mm/min
2.7Unit switching: N, Lb, kgf, gf
2.8Transmission mechanism:rollBead screw
2.9Drive motor:steppingmotor
2.10Machine size: W300*D270*H 500mm

2.11Impedance test function (optional)
2.12Weight: 25kg
2.13Power supply: AC220V 5A or specified
 
3. EquipmentFeatures:
3.1Peak Force. Return Force, DistanceWaitvalueautomaticcalculate.
3.2Suitable for global customers, free to switch load units:N, Lb, gf, kgf, .
3.3The test method can be freely set, stored, called, and modified, and the test results are stored in the hard disk (each record can be stored for countless times), and the data and curves can be directly printed.
3.4The life decay curve can be generated, and the detection report can be converted into Excel or PDF document format.

3.5The measurement graph is memorized by the computer, which can be zoomed in and out at any time, and N graphs can be placed arbitrarily on a piece of A4 paper.

3.6The upper and lower limit specifications can be input for the measurement project, and the measurement result can be automatically judged as OK or NO.

3.7The maximum measured stroke and load can be input, and the computer automatically controls it.

3.8The computer directly prints and stores the load-travel graph and inspection report. (No graph paper is required, A4 paper is usually enough)

3.9The test data is stored in the hard disk (each data can be stored, unlimited times)

3.10The test conditions are all set by the computer screen (including test stroke, speed, times, air pressure, pause time, etc.)

4.configuration list