- Navigation
- Tensile Testing Machines
- Environmental Testing
- Insertion Pull Force Testing
- Torsion Testing Machines
- Battery Testing Machines
- Combustion Testing Machines
- IPX Waterproof Testing
- Mobile Phone and Tablet
- Button Test Machines
- Mouse Testing Machines
- Wire Testing Machines
- Earphone Testing Machines
- Textile Testing Machines
- Impact Testers
- Tape Testing Equipment
- Drop Testing Machines
- Luggage Testing Machines
- Coating and Ink Testing
- Carton and Cardboard Testing
- Simulation Vibration Table
- Hardness Testing Equipment
- Erichsen Cupping Testing
- Customized Fixtures
- Electrostatic Discharge Genera
- Baby Stroller Testing Machines
- Pressure Testing Machines
- Packaging Testing Machines
- Ink Testing Machines
- Coating Testing Machines
- Others
- Mask tester
- Abrasion Testers
Contact Information
Tel：86-0755-27266729
Fax：86-0755-27266486
Mobile：86-18922863765
Q Q：3393844152
Email：1034236728@qq.com
Web：http://en.xiangminyiqi.com
Battery Impact, Acupuncture, Extrusion Triad Tester
- Battery Impact, Acupuncture, Extrusion Triad Tester
Product Details
Product Details
1. Main Function
(1) Impact test: The middle part of the battery is placed horizontally with a steel rod of a certain diameter. The object of a certain weight falls freely from a certain height above the battery, and is smashed on the steel rod. The steel rod is pressed against the battery below.
(2) Extrusion test This machine is suitable for all kinds of battery simulation. When the household waste is treated, the battery is squeezed (such as compacting garbage).
(3) Acupuncture is suitable for this type of battery-level simulation. When handling household waste, the battery suffers from acupuncture (such as compacting garbage).
2. Technical Parameter:
Model | XM-CZJ001 |
Falling ball weight | 9.1kg,10kg (can be customized) |
Falling height | 25~1000mm (You can lift weights to a certain height, and make up to ensure that heavy objects fall in the vertical direction, do not tilt, do not shake) |
Rod diameter | 15.8 mm |
Experimental power mode | Free fall |
Maximum pressure | 1KN-15KN |
Piston diameter | 32mm |
Experimental power mode | hydraulic |
Unit conversion | Kg/N/Lb |
Distance between need tip and bottom | 200mm |
Puncture speed | 10-150mm/S speed (can be set) |
High temperature resistant stainless steel needle | ¢ 2mm - ¢ 8mm (7 pieces) |
Delay function | 0-9999 seconds |
Lifting method | electric lifting |
Experimental voltage | AC380V 50Hz |
Total power | 2.0KW |
Weight | About 450KG |
